Carburettor intake system and throttle valve cleaner PETEC 72450 500 ml.

Price plus shipping costs , delivery time: here

INTAKE SYSTEM, THROTTLE & CARBURETOR CLEANER Item No. 72450

with hose extension to reach the throttle valve directly

Removes stubborn dirt and corking, cleans and maintains the entire
Intake system

Application in installed state:
Shake can well before use and attach spray probe. Access to the
Intake system must be exposed (behind the air mass meter).
Then start the engine and run the cleaner at a constant engine speed
of 2000 revolutions (should not be exceeded if possible) approx. 60
seconds using spray intervals (approx. 2-3 seconds) into the intake system
To achieve optimal results, the spray probe should be in the
System can be moved.
If the engine does not start when the intake manifold is removed, it may be necessary to
the ignition is switched off and the air mass sensor connector is disconnected
After use, turn off the engine and wait 10 – 15 minutes
After use, clear the error memory if necessary and
Re-teach the air mass sensor. If heavily soiled, repeat the process several times.
Repeat. Always follow the manufacturer’s instructions! Use only with
running engine! Observe safety data sheet! (Download PETEC data sheets
at www.petec.de)
Application in disassembled state:
Shake can well before use. Spray onto component and, depending on the degree of soiling,
Allow to work. Then wipe off with a clean cloth.
Repeat the process several times if heavily soiled. Safety data sheet
Please note! (Download PETEC data sheets at www.petec.de)

Further links

Further data sheets and safety instructions: here

ALL STATEMENTS WITHOUT GUARANTEE